Celebrating Over 60 Years...

As the World Leader in Tool Systems & Technology for the
Aerospace, Military and Telecommunications Industries.

 

Products


M39029 Connector & Contact Cross Reference

EU RoHS Compliance
FAR Compliance

Have questions about our products? Email us at dmc@dmctools.com or call us at 407-855-6161.

PDF Catalogs

Aircraft Tool Kits
Beta® Backshell
Connector Tooling Guide
GSA-SCIT
Safe-T-Cable®
Tensile Test Systems

You will need Adobe Acrobat Reader to view our PDF Catalogs. If you do not have it, click the image below to download your free copy.

abode reader

If you would like to receive a copy of our catalog on CD or in print, please send an email request to: catalog@dmctools.com. Be sure to include your name, company name and complete address and any particular requests or needs that you may have.


ABOUT SSL CERTIFICATES
 

MS25036-152 to -159,
Sizes 22 to 10

 M7928/1-1 to 10 Terminal
(similar terminal shown)             
Type:
 Class 1 Insulated Terminals
Insulation:
 Nylon, UL 94V-2
Terminal Body & Sleeve:
Copper, ASTM B-152
Plating:
 Tin, ASTM B-545
Max Temp Rating:
 105° C

TOOL SELECTION GUIDE**
TERMINAL SPECS
DMC TOOL/DIE OPTIONS
AWG
WIRE SIZE
mm
INSULATION DIAMETER INCHES (mm)
SLEEVE COLOR
TERMINAL / SPLICE PART NUMBER
HX4 SERIES*
HX3 SERIES*
M22520/40-01
TOOL*
HX4 SERIES SINGLE CAVITY
HX4 SERIES MULTI CAVITY
#16-14 1.04-2.62 .150 (3.81) Blue MS25036- 152 Y501 Die X511 Die AMT4001 Y671 Die Y1060 Die
153 Y501 Die X511 Die AMT4001 Y671 Die Y1060 Die
154 Y501 Die X511 Die AMT4001 Y671 Die Y1060 Die
155 Y501 Die X511 Die AMT4001 Y671 Die Y1060 Die
#12-10 2.62-6.64 .230 (5.84) Yellow MS25036- 156 Y501 Die X515 Die -- Y670 Die --
157 Y501 Die X515 Die -- Y670 Die --
158 Y501 Die X515 Die -- Y670 Die --
#22-18 0.26-0.96 .230 (5.84) Red MS25036- 159 Y501 Die X511 Die AMT4001 Y672 Die Y1060 Die
*MIL APPROVED.
**If MIL Approval is required, QPL status should be verified. Consult DMC for current status.

TERMNAL MANUFACTURERS' PART NUMBER
TERMINAL SPECS
TERMINAL MANUFACTURERS' TERMINAL #
AWG
SLEEVE COLOR
TERMINAL / SPLICE PART NUMBER
BURNDY
HOLLINGS-
WORTH
MOLEX
PANDUIT
THOMAS & BETTS
TYCO ELEC
#16-14 Blue MS25036- 152 YAES14N52 -- BB-823-04 PN14-4R RB1323 324159
153 YAES14N53 XR1902 SN BB-837-08 PN14-8R RB863 51864-1
154 YAES14N54 XR1906 SN BB-825-14 PN14-14R RB713 320563
155 YAES14N55 -- -- -- RB753 328976
#12-10 Yellow MS25036- 156 YAES10-N56 XR5108 N C-828-08 PN10-8R RC863 35108
157 YAES10-N57 XR5110 N C-830-14 PN10-14R RC713 35110
158 YAES10-N58 XR5117 N -- -- RC753 52077
#22-18 Red MS25036- 159 -- XR1879 SN AA-820-02 -- -- --
NOTE: Component manufactures’ and OEM instructions shall take precedence over the information presented in these charts. Wire ranges are for reference only.

TOOLS AND DIES FOR CRIMPING TERMINALS AND SPLICES

DMC has several die configurations for crimping terminals and splices. AWG size is one determining factor, but each die configuration has a designated tool series. The hand tool is the basis of each tool series and suitable for the low volume of prototype or repair work. For higher volume production and intermediate/depot maintenance, a tool series might include pneumatic tools, hydraulic tools, battery hydraulic tools, or electric hydraulic tools.

NOTE: If MIL Approval is required, QPL status should be verified. Consult DMC for current status.

HX4 TOOL SERIES OPTIONS FOR Y-DIES
HX4 HX4 Hand Crimp Tool
UDT4 UDT4 Upside Down Hand Crimp Tool
HXE4B HXE4B Battery Hydraulic Crimp Tool
HXE4-R HXE4-R Remote Head Battery Hydraulic Crimp Tool
HX23 HX23 Pneumatic Crimp Tool

M22520/40-01 TOOL OPTIONS
AMT4001 AMT4001 Hand Crimp Tool

HX3 TOOL SERIES OPTIONS FOR X-DIES
HX3 HX3 Hand Crimp Tool
PHX3 PHX3 Pneumatic Crimp Tool