MS17143-1 to -10,
Sizes 22 to 10 |
 |
(similar terminal shown)
Type: |
Class 1 Insulated Terminals, Rectangular Tongue |
Insulation: |
Nylon, UL 94V-2 |
Terminal Body & Sleeve: |
Copper, ASTM B-152 |
Plating: |
Tin, ASTM B-545 |
Max Temp Rating: |
105° C |
TOOL SELECTION GUIDE** |
TERMINAL SPECS |
DMC TOOL/DIE OPTIONS |
AWG |
WIRE SIZE
mm |
INSULATION DIAMETER INCHES (mm) |
SLEEVE COLOR |
TERMINAL / SPLICE PART NUMBER |
HX4 SERIES* |
HX3 SERIES* |
M22520/40-01
TOOL* |
HX4 SERIES SINGLE CAVITY |
HX4 SERIES MULTI CAVITY |
| #22-18 |
0.26-0.96 |
.140 (3.56) |
Red |
MS17143 |
1 |
Y501 Die |
X511 Die |
AMT4001 |
Y672 Die |
Y1060 Die |
| #16-14 |
1.04-2.62 |
.170 (4.32) |
Blue |
MS17143 |
2 |
Y501 Die |
X511 Die |
AMT4001 |
Y671 Die |
Y1060 Die |
| #12-10 |
2.62-6.64 |
.230 (5.84) |
Yellow |
MS17143 |
3 |
Y501 Die |
X515 Die |
-- |
Y670 Die |
-- |
| #22-18 |
0.26-0.96 |
.140 (3.56) |
Red |
MS17143 |
4 |
Y501 Die |
X511 Die |
AMT4001 |
Y672 Die |
Y1060 Die |
| #16-14 |
1.04-2.62 |
.170 (4.32) |
Blue |
MS17143 |
5 |
Y501 Die |
X511 Die |
AMT4001 |
Y671 Die |
Y1060 Die |
| #12-10 |
2.62-6.64 |
.230 (5.84) |
Yellow |
MS17143 |
6 |
Y501 Die |
X515 Die |
-- |
Y670 Die |
-- |
| #22-18 |
0.26-0.96 |
.140 (3.56) |
Red |
MS17143 |
7 |
Y501 Die |
X511 Die |
AMT4001 |
Y672 Die |
Y1060 Die |
| #16-14 |
1.04-2.62 |
.170 (4.32) |
Blue |
MS17143 |
8 |
Y501 Die |
X511 Die |
AMT4001 |
Y671 Die |
Y1060 Die |
| #12-10 |
2.62-6.64 |
.230 (5.84) |
Yellow |
MS17143 |
9 |
Y501 Die |
X515 Die |
-- |
Y670 Die |
-- |
| #22-18 |
0.26-0.96 |
.140 (3.56) |
Red |
MS17143 |
10 |
Y501 Die |
X511 Die |
AMT4001 |
Y672 Die |
Y1060 Die |
*MIL APPROVED.
**If MIL Approval is required, QPL status should be verified. Consult DMC for current status. |
TERMNAL MANUFACTURERS' PART NUMBER |
TERMINAL SPECS |
TERMINAL MANUFACTURERS' TERMINAL # |
AWG |
SLEEVE COLOR |
TERMINAL / SPLICE PART NUMBER |
BURNDY |
HOLLINGS-
WORTH |
MOLEX |
PANDUIT |
THOMAS & BETTS |
TYCO ELEC |
| #22-18 |
Red |
MS17143 |
1 |
-- |
-- |
AA-880-1 |
-- |
RA 480 |
327932 |
| #16-14 |
Blue |
MS17143 |
2 |
-- |
-- |
BB-880-2 |
-- |
RB 480 |
2-327934-2 |
| #12-10 |
Yellow |
MS17143 |
3 |
-- |
-- |
-- |
-- |
RC 480 |
327936 |
| #22-18 |
Red |
MS17143 |
4 |
-- |
-- |
AA-881-1 |
-- |
RA 481 |
2-327938-1 |
| #16-14 |
Blue |
MS17143 |
5 |
-- |
-- |
BB-881-2 |
-- |
RB 481 |
2-327940-4 |
| #12-10 |
Yellow |
MS17143 |
6 |
-- |
-- |
-- |
-- |
RC 481 |
327942 |
| #22-18 |
Red |
MS17143 |
7 |
-- |
-- |
AA-882-1 |
-- |
RA 482 |
327944 |
| #16-14 |
Blue |
MS17143 |
8 |
-- |
-- |
BB-882-2 |
-- |
RB 482 |
2-327946-4 |
| #12-10 |
Yellow |
MS17143 |
9 |
-- |
-- |
-- |
-- |
RC 482 |
327948 |
| #22-18 |
Red |
MS17143 |
10 |
-- |
-- |
AA-883-1 |
-- |
RA 483 |
2-327950-1 |
| NOTE: Component manufactures’ and OEM instructions shall take precedence over the information presented in these charts. Wire ranges are for reference only. |
TOOLS AND DIES FOR CRIMPING TERMINALS AND SPLICES
DMC has several die configurations for crimping terminals and splices. AWG size is one determining factor, but each die configuration has a designated tool series. The hand tool is the basis of each tool series and suitable for the low volume of prototype or repair work. For higher volume production and intermediate/depot maintenance, a tool series might include pneumatic tools, hydraulic tools, battery hydraulic tools, or electric hydraulic tools.
NOTE: If MIL Approval is required, QPL status should be verified. Consult DMC for current status.
HX4 TOOL SERIES OPTIONS FOR Y-DIES |
 |
HX4 |
Hand Crimp Tool |
 |
UDT4 |
Upside Down Hand Crimp Tool |
 |
HXE4B |
Battery Hydraulic Crimp Tool |
 |
HXE4-R |
Remote Head Battery Hydraulic Crimp Tool |
 |
HX23 |
Pneumatic Crimp Tool |
M22520/40-01 TOOL OPTIONS |
 |
AMT4001 |
Hand Crimp Tool |
HX3 TOOL SERIES OPTIONS FOR X-DIES |
 |
HX3 |
Hand Crimp Tool |
 |
PHX3 |
Pneumatic Crimp Tool |
|
