M7928/4-152 to -159,
Sizes 16 to 10 |
 |
(similar terminal shown)
Type: |
Class 1 Insulated Terminals, Radiation Resistant |
Insulation: |
Polyvinylidene flouride (PVF2) |
Terminal Body & Sleeve: |
Copper, ASTM B-152 |
Plating: |
Tin, ASTM B-545 |
Max Temp Rating: |
150° C |
TOOL SELECTION GUIDE** |
TERMINAL SPECS |
DMC TOOL/DIE OPTIONS |
AWG |
WIRE SIZE
mm |
INSULATION DIAMETER INCHES (mm) |
SLEEVE COLOR |
TERMINAL / SPLICE PART NUMBER |
HX4 SERIES* |
HX3 SERIES* |
M22520/40-01
TOOL* |
HX4 SERIES SINGLE CAVITY |
HX4 SERIES MULTI CAVITY |
| #16-14 |
1.04-2.62 |
.150 (3.81) |
Blue |
M7928/4- |
152 |
Y501 Die |
X511 Die |
AMT4001 |
Y671 Die |
Y1060 Die |
| 153 |
Y501 Die |
X511 Die |
AMT4001 |
Y672 Die |
Y1060 Die |
| 154 |
Y501 Die |
X511 Die |
AMT4001 |
Y672 Die |
Y1060 Die |
| 155 |
Y501 Die |
X511 Die |
AMT4001 |
Y672 Die |
Y1060 Die |
| #12-10 |
2.62-6.64 |
.230 (5.84) |
Yellow |
M7928/4- |
156 |
Y501 Die |
X511 Die |
-- |
Y672 Die |
Y1060 Die |
| 157 |
Y501 Die |
X511 Die |
-- |
Y672 Die |
Y1060 Die |
| 158 |
Y501 Die |
X511 Die |
-- |
Y672 Die |
Y1060 Die |
| 159 |
Y501 Die |
X511 Die |
-- |
Y672 Die |
Y1060 Die |
*MIL APPROVED.
**If MIL Approval is required, QPL status should be verified. Consult DMC for current status. |
TERMNAL MANUFACTURERS' PART NUMBER |
TERMINAL SPECS |
TERMINAL MANUFACTURERS' TERMINAL # |
AWG |
SLEEVE COLOR |
TERMINAL / SPLICE PART NUMBER |
BURNDY |
HOLLINGSWORTH |
MOLEX |
PANDUIT |
THOMAS & BETTS |
TYCO ELEC |
| #16-14 |
Blue |
M7928/4- |
152 |
-- |
-- |
-- |
-- |
-- |
53414-1 |
| 153 |
-- |
-- |
-- |
-- |
-- |
53417-1 |
| 154 |
-- |
-- |
-- |
-- |
-- |
53419-1 |
| 155 |
-- |
-- |
-- |
-- |
-- |
53422-1 |
| #12-10 |
Yellow |
M7928/4- |
156 |
-- |
-- |
-- |
-- |
-- |
53424-1 |
| 157 |
-- |
-- |
-- |
-- |
-- |
53426-1 |
| 158 |
-- |
-- |
-- |
-- |
-- |
-- |
| 159 |
-- |
-- |
-- |
-- |
-- |
-- |
| NOTE: Component manufactures’ and OEM instructions shall take precedence over the information presented in these charts. Wire ranges are for reference only. |
TOOLS AND DIES FOR CRIMPING TERMINALS AND SPLICES
DMC has several die configurations for crimping terminals and splices. AWG size is one determining factor, but each die configuration has a designated tool series. The hand tool is the basis of each tool series and suitable for the low volume of prototype or repair work. For higher volume production and intermediate/depot maintenance, a tool series might include pneumatic tools, hydraulic tools, battery hydraulic tools, or electric hydraulic tools.
NOTE: If MIL Approval is required, QPL status should be verified. Consult DMC for current status.
HX4 TOOL SERIES OPTIONS FOR Y-DIES |
 |
HX4 |
Hand Crimp Tool |
 |
UDT4 |
Upside Down Hand Crimp Tool |
 |
HXE4B |
Battery Hydraulic Crimp Tool |
 |
HXE4-R |
Remote Head Battery Hydraulic Crimp Tool |
 |
HX23 |
Pneumatic Crimp Tool |
M22520/40-01 TOOL OPTIONS |
 |
AMT4001 |
Hand Crimp Tool |
HX3 TOOL SERIES OPTIONS FOR X-DIES |
 |
HX3 |
Hand Crimp Tool |
 |
PHX3 |
Pneumatic Crimp Tool |
|
